XE-500/1000 (CNC) Gundrilling Machine
XE Type: Gundrill rotates/ workpiece fixed on the fixture
- XE type machines are suitable for the production of small & medium components shafts, mandrels
- Servo motor and Ball screw are used for the feed mechanism to insure smooth and convenient for feed rate adjust.
- Hardened and ground Main slide ways to hardness HRC 60. The opposite ways and gibs are all Turcite-B plated with hand scraped bearing surface
- Suspending type operate panel and MPG(Hand wheel) for easier setting and operation.
- Automatic lubrication pump is provided as standard accessory to ensure all the bearing surface and screws are well lubricated.
- The machine could be controlled by CNC or commentional model with PLC&man-machine interface.
- CE mark are available for special required.
|Specification||Model No.||XE-500 (CNC)||XE-1000 (CNC)|
|Drill Capacity||Hole dia||Ø3~Ø 12 mm , Ø10~Ø 25 mm (Option)|
|Max. depth (Z)||500 mm||1000 mm|
|No. of spindle||1~4 spindles|
|Power||Spindle motor||3~5 HP (with inverter)|
|Drill spindle feed (Z)||Servo motor 850~1300W / 5.39~8.34 N.M..|
|High pressure motor||3~7.5 HP|
|Speed||Max. spindle speed||6000 rpm|
|Drill Speed||10~ 150 mm / min|
|Rapid||5000 mm / min|
|Ball screw for feeds||Spindle infeed(Z)||Ø40 x P10 x C3|
|High pressure pump
(Every spindle one set)
|Pump output||40~150 Liter / min|
|Max. pressure||100~150 kgs / cm²|
|Coolant tank||800~1600 Liter|
|Floor space||3000 x 3300 mm||3000 x 4300 mm|
|Net weight||2100 kgs||2600 kgs|