High Speed Lathe Machines
Product Introduction
STANDARD ACCESSORIES
- 3-Jaw scroll chuck
- Driving plate
- Center sleeve
- Center
- Cooling equipment
OPTIONAL ACCESSORIES
- 4-Jaw independent chuck
- Steady rest
- Face plate
- Follow rest
- Work Lamp
Models | FH-660 | FH-760 | FH-800 |
---|---|---|---|
Capacity | |||
Center height | 330mm(13") | 380mm(15") | 400mm(16") |
Swing over bed | 600mm(26") | 760mm(30") | 800mm(35") |
Swing over cross slide | 450mm(18") | 550mm(21") | 590mm(23") |
Distance between centers | 1000mm. 1500mm. 2000mm. 2500mm. 3000mm. 4000mm. 5000mm. 6000mm | ||
Swing over gap | 920mm(36") | 1020mm(40") | 1100mm(43") |
HEADSTOCK | |||
Spindle bore | 80mm(31/8") | 80mm(31/8") | 105mm(4") |
Stage of spindle speed | 8 steps | 8 steps | 8 steps |
Range of spindle speed | 50~1060 r.p.m. | 50~1060 r.p.m. | 50~1060 r.p.m. |
Spindle nose | ASA A2-8 | ASA A2-8 | ASA A2-8 |
Feeds&Thread cutting | |||
Lead screw | ø45mm 2T.P.I. | ||
Number of feed changes | 36 | ||
Longitudinal feeds | 0.05 ~ 0.7 | ||
Cross feeds | 0.025 ~ 0.35 | ||
Inch thread | 2 ~ 28 | ||
Metric threads | 0.8 ~ 14 | ||
Compound | |||
Cross slide travel | 330mm | ||
Carriage rest travel | 210mm | ||
TAIL STOCK | |||
Quill travel | 160mm | ||
Quill diameter | ø80mm(3") | ||
Taper of Quill center | M.T.5 | ||
MOTOR | |||
Spindle motor | 7.5HP | ||
BED | |||
Width | 410mm(16") | ||
Net Weight(Approx) | 2050kg. 2200kg. 2380kg. 2530kg. 2680kg. 3050kg. 3350kg. 3650kg. | ||
Packing Size( L x W x H ) | 2800 x 1300 x 1500. 3300 x 1300 x 1500. 3800 x 1300 x 1500. 4300 x 1300 x 1500. 4800 x 1300 x 1500. 5300 x 1300 x 1500. 6800 x 1300 x 1500. 7800 x 1300 x 1500. |
※Specifications are subject to change without notice for further design improvement.